Wearable Snowman with LEDs
Description
https://youtu.be/T2z_d7TLyls This is a wearable that takes about an hour to charge and runs for 9+ on the battery. I purchased everything except the clip from Adafruit. https://www.adafruit.com/product/3500 https://www.adafruit.com/product/1655 https://www.adafruit.com/product/2124 https://www.adafruit.com/product/4237 https://www.adafruit.com/product/805 30ga wire (there isn't much space to solder on the LEDs) *NOTE* I used the hole dimensions from the Trinket Schematic, but they seemed a little off. I ended up cutting one to get three to align. I'll measure them and see what the problem is and upload a new .STL.
Statistics
Likes
0
Downloads
0