MKS Robin Mini To SKR 1.3 or 1.4 adapter (not just for) Kingroon KP3
Description
Since the extruder stepper motor has died on my MKS Robin Mini, I decided to swap it for an SKR 1.3, which I had at home. I made this adapter, so the microSD card slot is at the same place as on the Robin. Luckily, the USB port also lined up. I made a special version for the Kingroon KP3 printer, where the mounting tabs of the electronics cover would be in place. Assembly instructions: all nuts are regular M3 nuts, and are press fit. Secure the SKR board to the adapter with M3x8 screws with a washer underneath. Then (at least in the case of the KP3) secure the adapter to the baseplate with M3x12 screws.
Statistics
Likes
6
Downloads
0