Arduino Mega 2560 enclosure case
Description
Enclosure case, 27mm height from the top of the pcb to the roof of the case. Overall dimensions are 87mm x 107mm x 35mm. Internal holes also provided for fixture, two 3mm and two 5mm holes. The outside holes are spaced 75mm apart centre to centre with a 5mm hole and countersink. The lid is fixed to the base using two screws/bolts from the side using the provided holes. 3mm clearance hole with a 2.5mm interference hole on the lid so you can either tap or thread directly into it using a screw. Both parts should require no use of support material to print.
Statistics
Likes
3
Downloads
0