PC Monitor Bezel Clamp
Description
This is a cheap alternative to a very expensive to monitor clamps. This is my first take on them, any and all feed back will be appreciated. You will need 2 for a dual monitor set-up and 4 for a triple monitor set-up. (1 for each end of the 20x20 extrusion) You will also need 20x20 extrusion cut at least an 1" or 25.4mm longer than the height of your monitors. 30mm M5 bolts with M5 T nut (3 of each for each side of the monitor clamp) The non slip rubber pad, I suggest using this, https://www.amazon.com/ROOS-Self-Stick-Anti-Skid-Furniture-Protectors/dp/B01K7JFXAA/ref=sr_1_12?dchild=1&keywords=non+slip+pad&qid=1608170910&sr=8-12 These where designed to work with pretty much any monitor set-up, from the front of the clamp to the back wall, you have about 3" of space to work with to make sure everything lines up nicely. For the updated V2 version, please follow the link https://www.thingiverse.com/thing:4688781
Statistics
Likes
0
Downloads
0