Christmas Star
Description
Print 11 spikes and one base. For each spike, use these settings. make the bottom layer 1-2 thick perimeter shell 2-3 layers thick and top doesn't matter, I set to 5. Print with 0 infill. On my ender 3 v2, I ended up dialing the speed of printing the spikes to 300 and it still tuned out great. Once printed I cut out the base layer and expose the interior of the spike. Depending on how you chose to light the interior you may want to just cut a hole to insert a light into each spike. For mine I used a string of 200 fairy lights, inserting 18 lights into each of the 11 spikes. To assemble the star, I used foam 2 sided tape on every joint, then reinforced each joint with a healthy smear of epoxy.
Statistics
Likes
0
Downloads
0