Sapphire Plus mount for Mellow NF-BMG Aero direct extruder

Description

Mount carrier bracket for Mellow NF-BMG Aero or (BMG Wind aka NF-BMG-WIND) V6 direct extruder on 3d-printer Twotrees Sapphire Plus (aka SP5, SP-5). video https://youtu.be/NFuBrZRQGEE Bed level the same as default Sapphire Plus hotend. New print area 290*260 after upgrade. Assembly will require: - M3 nuts - M3 x 8mm, 10mm, 12 and 16mm bolts - Narrow nose pliers - Knife - Flush Cutter - Drill 3mm for sanding M3 holes - Drill 1.5mm for fix X-axis endstop switch - Nylon ties for fixing belts - Blower fan 5015 adjusted firmware Sapphire Plus and BMG Aero here https://github.com/khunpoum/Marlin-2-for-Sapphire-Plus-V2-gen2-Mellow-NF-BMG-AERO/releases/ video test of bridge printing 50mm and 100mm https://youtu.be/vkU0r3D12sE 3D printing settings Material PETG Hotend 240C Bed 70C Default fan speed: 25% Nozzle 0.4mm Layer height 0.2mm Line width 0.4mm 1) duplicate and mirror by z-axis part 3.stl 2) place part 1.stl with side blind hole up and trough holes bottom 3) part 2.stl nut holes up 4) settings in cura slicer 4.6.2 (for 1.stl mainly): ``` Quality: Layer Height: 0.2 Line Width: 0.4 Initial Line Wdth: 100 Infill: Infill Density: 100% Infill Pattern: Lines Connect Infill Lines: yes Shell: Wall Line Count: 4 Top Layers: 4 Bottom Layers 4 Supports: Generate Supports: yes Support Wall Line Count: 1 Support Z Distance: 0.2 Support X/Y Distance: 0.8 Minimum Support Area: 30 Enable Support Interface: yes Support Interface Thickness: 0.8 Supoort Interface Resolution: 0.2 Support Interface Density: 33 Support Interface Pattern: Zig Zag Minimum Support Interface Area: 2 Experimental: Enable Bridge Settings: yes Minimum Bridge Wall Length: 1 Bridge Support Threshold: 100 Bridge Space Infill Max Density: 10 Bridge Fan Speed: 100 Bridge Second Skin Density: 100 Bridge Second Skin Fan Speed: 100 Build Plate Ashesion: Build Plate Ashesion Type: Skirt Skirt Distance: 10 ```

Statistics

Category

Tags