WiFi Yagi Supports
Description
These are 3D printed supports for a Yagi WiFi antenna (2.4 GHz). They are designed to press-fit onto 3/4" x 1/2" x 1/16" thick angle aluminum. The antenna elements also press-fit into the 2mm diameter holes. The diploe support holds the driven element and is designed to fit two isolated pieces of wire (1 from each side) and it also has an opening on the top to solder connections. The element support is meant to hold a single piece of wire that is not connected anywhere. In my antenna, I used 8 of these element supports (1 for the reflector and 7 for the directors). Please see my video for more details, spacing of the elements, and the design process! https://www.youtube.com/watch?v=mHGvS2iHnLY
Statistics
Likes
6
Downloads
0