Creality CR-6 SE feet / legs riser / extender
Description
A set of simple leg extenders for rising your CR-6. They will allow more air to flow and cool your mainboard and PSU. They work with the original rubber feet of the CR-6 You must print four (4) of the "FEET_EXTENDERS.stl"... and one (1) of the "FEET_EXTENDER_ROLL.stl" file... (The FEET_EXTENDER_ROLL part is for the filament spool (roll) holder) I have printed them with PLA+ with good results, but they will can be printed in a flexible plastic as well. Print with "light" support material setting (8 - 10% is enough), at 50-55mm/s speed, and add a rubber or felt adhesive pad on the bottom after printing. (also 3X wall thickness and >18% infill) That's it!
Statistics
Likes
8
Downloads
0