Tormek XB-100 Horizontal Base
Description
<i>DISCLAIMER: I do not own a real Tormek XB-100, so the design was from images and size charts, and measurements.</i> This is a replica of the Tormek XB-100 Horizotal Base. It is used for extending older Tormek models to have the horizontal sharpening option. It is fastened with four screws (you need to drill holes in the Tormek). See mounting instructions here: https://www.tormek.com/media/104077/mounting_xb100_en.pdf I have made two different models. * With holes for regular nuts. You have to glue the nuts in the hole and use M4 bolts. So you'll need: -2 x M4 bolts -2 x M4 nuts -Superglue -Knobs from here: https://www.thingiverse.com/thing:641854 (optional) or * With printable bolts. Here you'll need to print the screws version and 2 x of the bolt. Edited the custom screws to fit better and the angle of the hole to push more from the side.
Statistics
Likes
10
Downloads
0