GEM Single Edge Safety Razor "ENDGEM SPEED" enders style
Description
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This SE safety razor is an Enders Speed inspired design. This razor uses the more readily available GEM blades. Appropriately named "ENDGEM SPEED", this razor is very easy to maneuver, and the unique handle design provides excellent feedback. The STL set includes one handle and three razor-heads. Each razor-head is marked with one, two, or three dots that indicate a different level of aggression ( 1 dot = mild, 2 dots = normal, 3 dots = aggressive ). Once assembled, it is a one-piece razor with no moving parts just like the original Enders Speed. How to install blade: Hold the blade from sides with thumb and index finger and edge pointing away from hand. With the same grip, insert the spine of the blade through the front of the razor-head between the cap and the comb and slide into the back slot. Inspect that the blade is properly centered and that the spine is making full contact in the back slot. The cap should have good tension on the blade, and the cap's index tab should be properly seated in the blade's center slot. DO NOT INSTALL, OR REMOVE BLADE FROM THE SIDES. This is a very easy print, and the only post-processing should be the removal of the included support on the razor-head and gluing the head and handle together. Additional supports are NOT needed. Please post your makes. Enjoy
Statistics
Likes
16
Downloads
0