Echo Show 8 Magnetic Stand
Description
We made 2 changes to this. It supports 10mm magnets, we thinned the plastic between the magnet and the base down to 0.5mm, and it uses a US 4-40x 3/4" pan head screw / nut, which are more readily available and cheaper in the US. I noticed that at 25% infill, the parts don't fit well together, but at 40%, it works pretty well, though the mount will still be pretty tight going into the base. We used 4 of these magnets in each hole: https://www.amazon.com/DIYMAG-Refrigerator-Magnets-100-piece/dp/B0753ZPBLQ. with that configuration, it sticks very well. I know that the base looks like it is on backwards, but you want to wide part of the base at the back of the show to provide more stability because you will be tilting it up.
Statistics
Likes
19
Downloads
0