Compact Watercolor Pan Palette Box
Description
Compact watercolor palette box + lid / tray Multiple boxes and lids can be stacked on top of each other in any order. Tested with White Nights full/half pans from Nevskaya Palitra (Saint Petersburg). For other brands, you can prototype a 1x1 box and see if your pan fits. See customization options below. The 7x5 size holds almost as many pans as [this box](https://www.amazon.com/St-Petersburg-White-Nights-Watercolour/dp/B006FHNDH4) but is much more compact. Attached is also the Fusion 360 file for customization: - https://grabcad.com/library/compact-watercolor-pan-palette-box-1 - most changes can be done directly from `Change Parameters` - number of full-pans can be changed from `RowCount` and `ColumnCount` - in case the pan has vertical walls, the lip can be discarded by setting `LipHeight` to something like 0.001 mm - though probably unnecessary, the pan size can be adjusted using `PanWidth` and `PanLength` - tolerances for stacking can be adjusted using `RimTolerance` - the lid could be sectioned for color mixing I needed to sand the sides a bit to fit the boxes & lids together, but I'd say that's due to my printer calibration and not the tolerances, but feel free to customize.
Statistics
Likes
22
Downloads
0