Magnetic Monitor Rack
Description
I have designed a rack as an attachment for a desk. A monitor can be placed on top. The two lower levels can be used as storage space, e.g. for keyboard, mouse and other cables. The lid is connected to the rack via magnets and can be easily removed and attached. Further instructions: Mirror the bracket in your slicer. Add rubber feet for a perfect grip Used magnets: Neodym 10x2 mm https://www.amazon.de/Neodym-Magnete-Stück-Extrem-Haftstärke/dp/B06X977K8L/ref=sr_1_5?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=magnete&qid=1608386947&sr=8-5 The horizontal boards are made of wood and have the following dimensions: 600 x 200 x 15 mm. Use wood screws and be careful when screwing, otherwise the wood or the PLA may crack. The outer bars have to be printed twice. Use as many support pillars as needed. In my case, a single support pillar was sufficient. Tips are very much appreciated.
Statistics
Likes
9
Downloads
0