Phone Stand Combustion Engine
Description
This phone stand is modeled after a single cylinder combustion engine. <br> The piston also has a recess for cell phones up to a width of 82mm and a thickness of 12mm (e.g. iPhone 8 with case). <br> The piston can be moved oscillating by the rotation of the crankshaft via the handwheel on the back. The handwheel is modeled after a Porsche rim. <br> <br> In addition to the printed parts, other components are needed, which are listed in detail below. Also there is a assembly instruction below. <br> <br> All parts can be printed without support. <br> <br> You will need to print the following parts: <br> 1x piston.stl <br> 1x connecting_rod_top.stl <br> 1x connecting_rod_bottom.stl <br> 2x crankshaft.stl <br> 1x crankcase.stl <br> 2x bearing_cap_large.stl <br> 1x bearing_cap_small.stl <br> 1x gear_large.stl <br> 1x gear_small.stl <br> 1x knob.stl <br> 1x shaft_cap.stl <br>
Statistics
Likes
5
Downloads
0