K40 equipment
Description
Additional parts I used for my K40 Laser. I bought the older model with analog power adjustment. Newer version seen to have other screws for the airflow. 1) K40-adapter: This is an adapter to connect the K40 air hose to an 125 mm, Mine is called "Rohrlüfter/Einschublüfter VKO - verengt 125mm" at amazon.de 2) Luftansaugung: Air hose inside the laser cutter. Shorter than the original part to be used with an high adjustable table, but better air flow. 3) LED-Ring v3: My version of the led-ring to mark the actual laser position. Glue 4 magnets 10x3 mm into the deepenings to hold the ring. The led-ring is a 8bit WS2812 5050 5V ring with 32 mm diameter. 4) Kabelhalter Magnet: Same principle as with the led-ring. Glue two 10x3mm power magnets. Holds cables to the casing and can be removed easily. To be continued...
Statistics
Likes
1
Downloads
0