TFT50 LCD stand + case
Description
This is a LCD stand for the Bigtreetech TFT50 touchscreen LCD, I designed it because I was lacking a design of my own, because I didn't want to risk shorting out the electronics :-) I made room for M3 inserts so I can screw down the PCB in the plastic housing. And I also made a design with no inserts. The bolts can be screwed into the plastic after cutting a thread I hereby release the .IPT files for anyone who might want to change the design. - EDIT : 30/12-2020 I came to the conclusion that not all of my USB drives fits in the case, so I slightly sunk it down, such that it can accomodate at least a Kingston DataTraveler 100 G3, which is physically speaking the largest one I have. I also made a 2nd part of the swivel / holder that is not sunk down, such that a normal hex head bolt can be tightened. I also moved the SD card hole up by 0.5 mm because it was slightly off. - EDIT : 10-01-2020 I re-exported the files, since my first export assumed cm in measurements, and the files showed up being way to small in the different slicers - EDIT : 19-02-2021 by request, I have added STEP files that can be downloaded and modified.
Statistics
Likes
7
Downloads
0