OnStep SHC Case with 2,42" Display
Description
Two versions available: - with analog joystick - with buttons My Recommendation: Buttons instead of Joystick - firmware is build for buttons, it just works better! Needed parts Joystick https://www.aliexpress.com/item/32967802003.html Buttons https://www.aliexpress.com/item/32982073551.html Display https://www.aliexpress.com/item/32950307344.html ESP32S Module with 30pins https://www.aliexpress.com/item/1005001635370174.html 12x M3x8 countersunk screws for case 4x M2x4 for display mouting 4x M3x5 for ESP32 4x M3x5 for joystick 2x M3x10 for clamp mounting - per clamp 2x M3 nut for holder - per clamp Hotglue Heatschrink tubes Wires Pullup resistors for buttons anything between 2k2-10k will work fine 6x0,14mm2 cable https://www.tme.eu/de/details/liyy-bk-6x0.14/mehraderleitungen-ohne-abschirmung/technokabel/0162-015-05/
Statistics
Likes
15
Downloads
0