JPRDD - RPi Cam Housing + Bed Handle for Ender 3 - Pro v3.0
Description
I got tired of other Raspberry Pi Camera mounts and decided to make my own! The clamp on the camera housing allows you to get the position you want on the ball and lock it down so it can't move around on you. <h1>Bill of Materials</h1> * Fits Rasberry Pi Camera Module ( I recommend getting the extra long ribbon cable ) https://www.amazon.com/gp/product/B07SN8HB1R/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 * Requires 8x M2*4mm Screws. https://www.amazon.com/gp/product/B071KBVZVV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 <h1>Orientation</h1> * Clamp Screws - Horizontal for strength * Lid - Top face down * Housing - Flat on back * Everything else - Vertical </p> <h1>NOTES:</h1> - Clamp screw threads will be a little messy due to supports. I find I have good luck running them through the back side of the clamp ( so they can go the whole length of the bolt ) to clean up the threads. - Ball Joint is TIGHT ( on purpose ) I try to align the octagon with the cutout and then start threading the nut underneath to suck it into place. Works pretty well. - Set supports to "Everywhere" in Cura Support Z distance 0.19 Support X/Y Distance 0.8 Tree supports aren't recommended but typically still work. </p> <p> Made in Tinkercad, Sliced with Cura 4.8.0 </p> <p> If you enjoy my work, please consider supporting me with a tip! </p> * BTC- 18SsPKD3CzhmuRVMnEhBSs2tRLXxYwyZWH * ETH- 0x9d06F3e0A89b19c276f05778aC476AeF4790D905 * DOGE- D8e9s3L9fdjsa9k9zG2URB2EUnAAjWqnSm * Paypal- paypal.me/onienzeru Thanks!
Statistics
Likes
8
Downloads
0