DZP MK2 Brass Barrel Sleeve
Description
This is used with a 17/32 brass barrel for the Dart Zone Pro MK-2. Installation The brass barrel fits inside of this part. This part fits into the plastic fittings of the DZP MK-2. Both ends are beveled to ease with installation. There may be some sanding needed depending on the tolerances of the print and the plastic parts. One end of this part has a bevel on the inside. This end goes toward the breech, the flat end goes toward the barrel exit. This allows one end of the brass to be trumpeted slightly to improve dart loading into the tighter barrel. Recommended brass barrel length is 90mm. Works best in conjunction with the DZP MK2 Maximum Compression part as well as a seal improvement on the blaster.
Statistics
Likes
7
Downloads
0