Lite Weight 5015 Adjustable Blower Duct for Micro Swiss direct drive
Description
Fits CR-10 CR10 V2 CR-10-S5 CR-10-S4 CR-10S CR-10 MINI CR-20 CR-20 Pro Ender 2 Ender 3 Ender 3 Pro (printer pictured with Yellow Duct) Ender 3 V2 (printer pictured with Red Duct ) I wanted a lite weight Duct design that was powerful, that I could see my nozzle during printing, also making it adjustable! for the Micro Swiss direct drive and Hotend I used all M3 sized hardware to hold the hotend fan (top left corner) to the direct drive plate by making a standoff out of Threaded Inserts and SS M3 nuts and bolts with hex head style. (in this order) (M3x20, "Direct drive plate", M3 Nut, M3x8x5mm, M3x10x5mm "FAN", M3x8) ---NOTE: this is a small/fine adjustable pivot point Then connecting the Duct assembly to the (top right corner) hotend fan with M3 hardware pressing a M3x10x5mm Threaded Insert in the 5015 fan itself. (need a drill bit 11/64" to open the hole on the fan to press in insert) (M3x20, "Fan", "Duct" M3x10x5mm insert) ---NOTE: this is the Course/large Adjustable pivot point For the 5015 mounting to the Duct assembly I used a M4 nut and bolt (M4x20 bolt and M4 nut) The Yellow wire is the Positive to the Red fan wire. The Blue wire is the Negative for the Black fan wire. 5015 fan used https://www.amazon.com/gp/product/B07DB7DLMM/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Female Thread Brass Knurled Threaded Insert https://www.amazon.com/gp/product/B07VFZWWXY/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1 304 Stainless Steel Screw and Nut https://www.amazon.com/gp/product/B074Q4Z2C6/ref=ppx_yo_dt_b_asin_title_o03_s02?ie=UTF8&psc=1
Statistics
Likes
4
Downloads
0