Fractal Era ITX big fan adapter
Description
A simple upgrade to fit a large fan into the small ITX case. The case is very small and if you install a large ATX power supply, then only a 120mm fan can be mounted. However, with this upgrade you can install the huge Noctua fan. There is only a 2mm air gap on both sides of the fan. The screws used are simple fan screws. The installation is very easy. The adapter is screwed to the fan, the cable of the fan is plugged onto the motherboard and the four screws for mounting are simply screwed in from above. PETG is the most suitable material. ABS also works, but could come off the heatbed during printing, as the bearing surface is very small in relation to the overall size.
Statistics
Likes
0
Downloads
0