Prusa Mini Dual Gear BMG Extruder
Description
There is a BMG style extruder for the Prusa Mini. It works perfectly and is cheaply made! You need a BMG clone like this for Hardware: https://www.amazon.de/gp/product/B0829RTZR2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 And Brass Inserts M3 like this: https://www.amazon.de/ruthex-Gewindeeinsatz-St%C3%BCck-Gewindebuchsen-Kunststoffteile/dp/B08BCRZZS3/ref=sr_1_1_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=8U26DC9X3M6M&dchild=1&keywords=m3+messing+einpressmutter&qid=1608817387&sprefix=M3+mess%2Caps%2C166&sr=8-1-spons&psc=1&smid=A2LZ0UUKEAXYKL&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExQ0U2WjRFRVFCWUVXJmVuY3J5cHRlZElkPUEwMDM1NDIzM1FCQVoyVlUyWk1BMSZlbmNyeXB0ZWRBZElkPUEwODM3OTgxMjhaTUk2WUhUQkhDOSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= At the top comes a 1/8 coupler. Below is an M6 coupler The Z cover has been changed slightly. Travel in Z 180mm with it. Copied into the Start Gcode: M92 E415 After the switch-off run the Gcode This is a remix of: https://www.thingiverse.com/thing:4655132
Statistics
Likes
20
Downloads
0