Anycubic wash and cure anti-yellowing solution - 365nm light blocker
Description
This is a cover that will block the light from the 365 nm leds of the wash and cure and only let the 405 nm lights reach the prints. This is useful for translucent resins, since it will avoid their yellowing. As per the original creator suggestion, you can add aluminium tape on the back of the piece so that the 365nm lights won't create a film over the plastic. Remixed to make it sit correctly (you had to cut more than 1mm on the bottom) and to make it fixed by screwing it on the existing screws. It's still untested, but the measures should be correct.
Statistics
Likes
12
Downloads
0