OverKill 120a LifePo4 BMS braket for 4s 60ah Fortune cells
Description
Quick way to attach a 4s Overkill BMS to the threaded rods you can use on a 4s 60ah Fortune lithium Iron phosphate bank, has holes in bracket for cable managemnent Remove the corner screws in the BMS and run a longer 20mm M3 from the back of the model to secure the BMS in place Attach the bracket using 1/4 x 20 nuts and washers , after you have secured the battery pack to your 1/4 x 20 rod. (refer to picture for reference.) Printed with PLA+ , 40% infill .2 layer height, but feel anything would be fine, not under to much stress. Hope this helps someone. Cheers
Statistics
Likes
6
Downloads
0