Logitech G29 Rubberless Brake Stopper
Description
This is a simple prism designed to limit the overtravel of the Logitech G29 brake pedal when the rubber stopper is removed. If you have removed the rubber stopper, you will notice that you reach 100% braking way before the pedal actually stops and can't adjust it through software. Just print this, orient the arrow vertically, and put this in the stopper's place. It will limit your overtravel to about 1mm after hitting 100%. Print this in a rigid material like PLA or PETG. Anything flexible would let the brake go more than 100% because this thing is designed to precisely limit the travel to 100%. So go with PLA or PETG, NOT TPU. I used PLA in a relatively high infill.
Statistics
Likes
3
Downloads
0