Vacuum Bag Check Valve
Description
DIY Vacuum bag check valve. This is something I made in order to store my filament. I attach it on the side of a heavy duty Ziplock bag. Don't forget to put a Silica Gel pack in with your filament. Can have many other uses. Print one of everything. CAD file included if you want to modify something. To Install: 1- Use the inside of the Nut as a template in order to mark the size of hole you are to cut in the bag 2- Cut out the hole you just marked. 3- Base is to inserted inside the bag 4- Put threaded area of Base through the hole of the bag you just cut. 5- Install Nut on Base 6- Install Valve onto Base flat side of Valve pointing away from the base 7- Screw in Boss onto Base To Use: 1- Loosen Boss 2- Vacuum air out 3- Tighten Boss
Statistics
Likes
38
Downloads
0