Rackmount for Amcrest AMPS5E4P-At-65 PoE Switch V2
Description
Version 2 of 2U rackmount for an Amcrest AMPS5E4P-At-65 PoE switch to fit in a Nimble/six-inch rack. [Version 1](https://www.thingiverse.com/thing:4621559) As previously stated, **full rack build w/ BOM to come at a later date**. -------------------------------------------------------------------------------------------------------------- Mounting tabs for the switch are now 15mm long, instead of the original 10mm, which helps with the torsion issue significantly. This time around, I got the spacing figured out properly, and there are 4 tabs, as there should always have been. I moved the side vent holes a bit, to allow the screws to be accessed fully. In the original, I had to come in at an angle, and the rear mounts were blocked... yeah, that was a mess. (Which is why version 1 was posted with only 2 mount points.) This version is also shorter, both to save on materials, and because when I saw it in the rack, it just feels like I've wasted space. Even the empty space where the extra length was looks better, in my opinion, because at least it _might_ be useable for something else. Brand and color changes in the filament are purely due to being what I have on-hand at the moment.
Statistics
Likes
3
Downloads
0