3 Wise Skulls Mailbox Flag and Mount
Description
This series of mailbox flags are based on the great design by jdpurcell - https://www.thingiverse.com/thing:3487401 Thingiverse is still broken and won't allow me to designate the original source files such as the one above and this one: https://www.thingiverse.com/thing:3054970 NOTE: Please Like or Save to Collection because recently new Thing posts are disappearing into the ether and don't appear under my designs. It is not a standard (if there is such a thing) mount, so you will probably have to drill new holes in the mailbox and use 2 flat or round head countersunk machine screws to mount. The mount has a small nub to keep the flag verticle when raised. If too tight, file down the flag a bit. If too loose,file down the raised sections of the inner mount. I would recommend using PLA+ or PETG/ABS, etc - but if you only have PLA - use a high infill (50% +) for strength. On the sample photos, the flag was printed with Red filament and some color quickly added with an airbrush. I have designed over 600 remixes of various types. If you want to search by the type, check the About section of my designs: https://www.thingiverse.com/toakamate/designs
Statistics
Likes
6
Downloads
0