Axial 1/12 Scale Barrage Axle extensions
Description
If you have an Axial 1/12 Scale Barrage you know it's pretty cool. problem is there is very little aftermarket support or upgrades. I raised my Barrage and immediatly realized it was way too tall, and way to narrow wheel base. I did some searching and found nothing so I pulled the wheel off and went to work. Biggest limiting factor is the axel length. you don't have much to play with. After some head scratching I kept with the KISS principle (Keep It Simple Stupid) and just flipped the wheel around and designed a new hub. This gives you almost 2" of additional wheel base, no mods required. once printed you will need to remove the 5-hex screws from wheels and drill out the matching holes to your rims. you can use stock bolts or servo screws to mount
Statistics
Likes
0
Downloads
0