Elegoo Mars Pro / 2 Pro Fume Exhaust Mod
Description
You'll need: Flexible hose 2.5" $12 (the one I used https://www.amazon.com/gp/product/B01N0RH9PH ) Hole cutter 2" (if you don't want jagged edges like I have done :p) Cardboard Step 1: remove back plate, carbon filter, fan Step 2: temporarily install duct w/ fan Step 3: use template as shown on last pic and mark its location Step 4: remove duct and put on the back plate, mark holes on it using template Step 5: cut/drill holes on back plate (it's a soft alloy) Step 6: install fan duct and back plate Step 7: attach connector A using screws from the original carbon filter Step 8: cut hole in cardboard in shape of connector B Step 9: twist-lock the ring Step 10: screw on the hose (counter-clockwise) and you're done! Enjoy safe printing. Gamla 3D Workshop
Statistics
Likes
116
Downloads
0