Swiveling guitar wall hanger (REMIX)
Description
This is a remix of Sketch's guitar hook with the added feature of allowing the stirrup to swivel to accommodate asymmetrical headstocks etc. I also added a spacer in case you need more distance to the wall so the back of the guitar body doesn't hit against the wall. Update: added a diamond-shaped base and spacer. Print as oriented in the STL files and with supports everywhere for the stirrup and the base. The stirrup would print a bit more cleanly oriented vertically but given the shearing created by the weight of the guitar the filament has a lot more strength printing it horizontally. The base has a channel inside the barrel for the stirrup to latch onto so you'll need to remove and/or crush the supports after printing. I found an easy way to do this is just to insert the stirrup and give it a good twist, either crushing or loosening the ring of support. I printed at 100% to get the sturdiest result though it could be fine at lower infills. But I'd rather be safe than sorry. Finally, I personally would never hang a precious instrument on anything that was 3D printed, but for something that isn't a priceless heirloom this should do the trick. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/97d9MqJYiju
Statistics
Likes
5
Downloads
0