ikosahedron
Description
This was a weekend lockdown project I did enjoy designing. It's a decorative light. I got my inspiration from Chappel this video https://www.youtube.com/watch?v=sPhh0WGFzKA&t=868s I get the lamp base and lamp ball from the IKEA base link below https://www.ikea.com/gb/en/p/skallran-table-lamp-base-dark-grey-metal-30421527/ I also get 14 mm radius circular wooden profiles from a hardware store and cut them at home. You can also print profiles as well if you like it will make printing time exponentially long but it can be done. I add the whole project step file you may measure various distance profiles from there. Also, you may find my measurements below 16 x 165 mm length middle and TS BS part connections 8 x 105 mm length top and bottom part connections 8 x 115 mm middle connections YOu may found print settings below its not much print time every parts 60 minutes approximately print time in the part names, I did add x for how many times you need that part. middle joint B is a fairly complex file I need to design that two-part you may use m3 20 bolts and nut for the connection it does not need support I did the final assemble with hot silicon and after that it's sturdy. I did paint wooden profiles to white and I did a bed Job while I doing that I suggest applying mate clear polish its look better. Happy printing
Statistics
Likes
3
Downloads
0