XLR to 1/4" Adapter Enclosure
Description
This is an enclosure I made to house an XLR to 1/4" adapter that I made. I bought a digital mixer to replace my old analogue mixer, however the new mixer only has XLR outputs for the aux lines. Using some of the old mixer's XLR female jacks and 1/4" female jacks I made adapters for the new mixer. The holes for the XLR jack will need to drilled out a bit and have room to be countersunk as well, however that may not be necessary depending on the printer and screw size. My screws were 3mm x 8mm with a head size of 2.2mm, so they could easily sit flush with the case when I countersunk the holes.
Statistics
Likes
2
Downloads
0