Sovol SV01 Filament sensor upgrade
Description
Hi, This is actually a remix of: https://www.thingiverse.com/thing:2822322 by JohnFlimsey (remix section was not working) Modified the file internal part to function for the Sovol SV01 to upgrade the Sensor. Now you can print full height and still use the sensor, The stand that goes into the Sovol will need supports. You will also need PTFE tubing like in picture. Please use Sovol_Stand_Original_bolt.stl if you are reusing The T bolt and screw from the sovol sensor mount. Sovol_Stand_M3Tbolt.stl if you are using your own M3 screws and T bolts. ****NEW FILE ADDED No Support Needed, see images (Print with large brim) ****If you are using this new file please note that it GRIPS the PTFE bowden tube now SO DON'T OVER TIGHTEN THE TWO SCREWS ON THE LEFT. Tighten just enough to grip the bowden tube. NEW_Lid.stl --- This is the lid to the other 2 new files NEW_Main_3MTbolt --- This has holes so you can use your own M3 screws and T bolts NEW_MainOrig_bolt --- For reusing The T bolt and screw from the sovol sensor mount NOTE: It seems that the Cheaper white PTFE Tube works best.
Statistics
Likes
25
Downloads
0