Power Supply, Board and Relay Mount (CR10, BTT SKR 1.3)
Description
A simple design to mount my power supply, board and relay onto the top of my printer. The power supply used is the default power supply from a CR10. This is likely the same as an Ender 3, and other printers, but I cannot confirm this. The board used is an BigTreeTech SKR 1.3. Other board may work if their holes are in the right position, which would have to be measured. The relay used is is solid state relay from Amazon (amazon.com/gp/product/B01LXLEBHQ). Again, other relays will work if their mounting holes are in the same positions. An STL file and a SOLIDWORKS model is included. If you need to change the model to suit your hardware feel free to edit the SOLIDWORKS file. M3 and M4 nuts and bolts are used to mount the components to this design. There are holes in the back for five M4 T nuts to secure the mount to your printer's 2020 bar. The components are a tight fit. It is recommended to mount the part to your printer first, then put on your board and relay, and lastly attach the power supply. Always turn off and unplug your power supply before handling it.
Statistics
Likes
1
Downloads
0