Fiio K3 Desktop or Under Desk Mount
Description
This is a little mount that is slanted to allow you to mount your Fiio K3 headphone amp either on top or under your desk. Please note that if you mount it on top of your desk, long plugs on the rear may hit your desk so you might need to extend the posts. When printing, I recommend posts up so that the supports are attached to the surface that is covered by the amp once attached. I strongly recommend supports with a raft, I didn't do this and ended up having to spend some time sanding to ensure a good fit. It is designed to be screwed in, but I made the posts somewhat larger so you can also use double-sided tape, preferably something with a bit of foam so it conforms to the surface for better adhesion. You'll need a rubber band or steal a hair-tie to affix the amp. This way it is easy to remove to get at the back if you need to.
Statistics
Likes
2
Downloads
0