FlashForge Finder Heated Bed Adapter
Description
I decided it was time to upgrade my FlashForge Finder to a heated bed. There were a couple tutorials that I found for the project, but they used a fabricated part and I did not have the material or tools. So I designed this adapter to replace the stock bed and provide a mount for a heated bed. Here is the heated bed I used: https://www.amazon.com/gp/product/B088W5S9FD/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1 Full write up on the project on Instructables here: https://www.instructables.com/3D-Printer-Add-on-Heated-Bed/ NOTE: I did the initial testing and first full print with PLA, but while testing the heated bed it warped due to the heat. I recommend printing it in ABS if possible. Also, you will need larger printer than the Finder to print this part.
Statistics
Likes
0
Downloads
0