another Anycubic i3 mega printhead light
Description
Another Anycubic i3 mega printhead light, a first draft for testing. The assembly is done without gluing, just solder and plug. All cables are hidden, very thin cables are required. In my junk box, I found four white LED 3mm, which were intended for another project. An LED strip contains only 3 LEDs over a length of 50mm and does not light up at an angle to the nozzle - so it is not needed. So why not use the LED for this project? The LEDs: EVERLIGHT 204-15UTC/S400-X9 (Reichelt LED EL 3-7150WS)
Statistics
Likes
2
Downloads
0