FLSUN QQ-S Pro Extruder Mount
Description
I really wanted to optimize the bowden path a bit to cut down on filament friction. Since the other relocator on here was for another version of the QQ with no CAD file I had to do this from scratch. I also added a mount for the cabling and moved the extruder a little more to the center. You will need 2 M4x16 screws to mount the extruder but I used the existing fan screws for the bottom (do not over tighten or you will strip the fan plastic). I plan on removing the existing cooling fans and adding 2x120mm fans underneath to make it as quiet as the TMC2208's. With that upgrade this fan hole will become an exhaust port with a piece of screen behind it so for the time being I'm not worried about putting my finger in the fan. Let me know if anything needs to be fixed and I plan on putting the CAD files on here for others to tweak. ***UPDATED*** I realized that my original design did not allow clearance to the entire build plate. I apologize to anyone who printed it and had issues. I also added the STEP file for anyone else who wants to change it.
Statistics
Likes
11
Downloads
0