DE Safety Razor Blade Sharps Bin - Print In Place
Description
This is a print-in-place sharps bin for DE razor blades. It should hold at least 60 blades and is completely sealed so it can be safely thrown away once full. The bin should be printed slot-side-down and without supports. It uses a diminishing diamond-square layer pattern on the top layers to print the bottom of the bin without any supports, but also without any drooping. **This requires you to print at 0.2mm print layer height otherwise it will not work.** Inside the box a wedge shaped extrusion either side of the slot prevents used blades from falling back out.
Statistics
Likes
1
Downloads
0