Canopy for Talon Pro (Mini Talon V2)
Description
This is a canopy for the new Talon Pro (aka Mini Talon V2). You need to cut away some foam, and the best time to do that is before the two fuselage halves are joined together. There is a deck already molded in, just cut away the top pieces of foam with a really sharp blade to create the fpv deck, see one of the photos. The camera holder is for a full size fpv camera, i used a Foxeer Falkor on this design. Also added is a version for a mini size fpv camera, like the Foxeer Predator V4 (also used in the design process). Some foam needs to be cut away for placing the camera holder. The canopy fits really well, flows nicely with the surrounding foam. Pan servo used in the design is a TGY-R5180MG. I included a version of the canopy without the pan servo for those that are looking for this. Also included a version without FPV camera cutouts, pan/tilt only. The canopy is held in place with 4 M3 nylon screws that go into M3 standoffs glued in the foam underneath.
Statistics
Likes
4
Downloads
0