Coreception / Elf BLtouch Solid Mounts
Description
Solid mounts for BL touch. There are 4 sizes. I'm currently using the 14mm mount with the Dragon hot end. It provides approximately 2mm of offset. Guessing the stock hot end could use the 12mm or many be the 10 I screwed in the screws before mounting to create the threads. Please note that for the horizontal holes there is a side with a wider openings. The wider opening need to face the hot end. These larger opening allows you to put part of the screw in to hold it in place. Making it much easier to mount due to the tight space. Can be printed in .2 or .1 layer height with 2 walls. Infill does not matter.
Statistics
Likes
1
Downloads
0