Ksger T12 Case
Description
This is my KSGER T12 soldering station based on KSGER STM32 controller & cheap 24v/4a power supply from eBay or AliExpress. All parts are designed to print without support. Hardware: - M3 x 10mm long bolts (8mm long will work too) - M3 nuts - M3 x 10mm long self tapping screws - KSGER T12 STM32 controller v3.1 - AC-DC24 power supply - IEC320-C8 2 pin or IEC320-C14 3 pin (recommended) power connector - 16mm round switch
Statistics
Likes
36
Downloads
0