Indicator light housing Neon LED for panel mount
Description
Print two nuts and one housing and one cover. Don't use supports. It's all made to be printed without supports. The cover should be out of transparent plastic. You don't need to use brim or raft, skirt works the best. The screws are M12x1.75, which are ISO standard nuts/screws. You can run the 3D printed threads through metal M12 nuts/screws for final re-touch or using appropriate thread making tools. It's made for a 5 mm diameter light. Printed with setting: 2 mm thickness wall, which causes to have no infill, just walls. Height resolution was 0.12 mm using 0.4 mm nozzle.
Statistics
Likes
2
Downloads
0