Beyblade Burst Xceed driver
Description
Almost fully 3D printable Xceed driver from Super Hyperion! All you need is a spring which can be compatible or taken off from damaged/knock-off driver and 3 screws. You can choose if you want a fully plastic tip or make yourself a rubber one (for example you can use my cutoff for automatic pencil rubber and glue it to the smaller part 5). 3 screws are needed to connect it together (one inside for the tip and two for enclosure). Screw it tight so it can perform as the original one. ###Actually you can put anything for the tip if it's a cylinder with 5 mm diameter and about 4.5-5mm length.
Statistics
Likes
3
Downloads
0