Sovol SV01 Z Brace and Frame Stiffeners
Description
****As always for anything I upload, feel free to modify and remix to suit your specific needs if there is something you would change or don't like about the design. Tinkercad is very easy to get the hang of.**** This is a remix and expansion of this thing by MadHatter3D but Thingiverse remix appears to be broken so I'm linking here to the original to give credit: https://www.thingiverse.com/thing:4182718 With the files listed here you can print the bottom Z Brace Mount (left and right side) as well as two frame stiffeners for the front (left and right). The two front pieces can also be printed to stiffen the joint between the lower frame and the gantry if you are using BLtouch and not using the Z-stop. I have another design if you are still using the Z-stop. All pieces require 5 M5x8mm bolts and 5 M5 T-nuts. I've included the top mount for the Z brace here but it is unchanged from MadHatter3d's design, you can download from his link above or here. Getting the Carbon Fiber rod in is very tight. This is unchanged from the original design from Madhatter3d's design. I lightly filed the opening to give it a round and then after getting the rod started used a hot air gun to heat the piece a bit as I pushed the rod in. Fit is so tight I did not bother with putting in bolts to clamp the rod in place. Printed in Sainsmart Clear PETG Nozzle 240C Bed 70C Layer Height .28
Statistics
Likes
10
Downloads
0