Sodastream to Soda Bottle Adapter
Description
This adapter is for soda bottles to Sodastream. I modeled this off of a Coca-Cola bottle. Use regular bottles on your Sodastream! WARNING!!!!: 3d printing is not food safe. DO NOT use this adapter for a lid. Use the same cap that the your soda bottle came with. reused bottles should only be used a couple times. They may fail if you use them too much. COMMENT if you want print on demand. Comment if you want f3d or step (if fusion still supports that.) UPDATE: v5 and v4 have a small difference. The inner diameter is slightly smaller (0.25mm.) print both to see which one will work. It shouldn't wiggle when inserted. V5 also has some more chamfers to improve print quality UPDATE: v6 has been made. It has the goal of improving the seal. It also deals to solve the stuck issue that some people are getting. If you are getting this remove back plate and there will be two tabs push on them and the front will pop off. simply push down on the white plat will the clamp is open to clear the jam. I have also increased the depth for the sealing nub to clear For a video on how to do this: https://www.youtube.com/watch?v=rLocf7_JTLg UPDATE: V11 has been released and has solved every issue. It is now finished and done with testing. I am taking down all other versions
Statistics
Likes
42
Downloads
0