CNC 65mm Spindle/ Router mount (Makita/ Katsu)
Description
This is a simple design for a cnc router mount. Its suitable for 65mm spindles/routers like the Makita RT0700 or Katsu. It has an elongation at the front, which i used to mount additional tools (e.g. camera, laser etc.). I recommand around 40% infill which should be enough for most purposes. Inside, it has 3 small lines to reduce the contactsurface to the router while still remaining enough clamp-force, to reduce the heat, which might damage printed router mounts. If possible, i would recommand a more heat resistant filament. Be carefull while mounting. You should use washers to reduce pressure induced cracking close to the drilling holes, or increase the infill.
Statistics
Likes
1
Downloads
0