DreamPi Housing for RaspPi Zero W
Description
This is a simple housing for a DreamPi setup using a Raspberry Pi Zero W. I wanted a way to fit both the usb modem and the pi in a small form factor and that's what this is. I'm using the usb modem with a voltage inducer attached that I purchased from https://dreamcastlive.net/shop/ and I've forgone the usb cable and soldered a connection directly to the pi. I added a spot to the lid where you can reuse the clear plastic for the lights so you know if everything is working. Just use a drop of superglue and it should stay in place. I've designed the usb cutouts so that the pi ports will snap right in place snugly. Then you can use 4 m3 screws to secure it. The usb modem's phone port fits snug inside the lid housing and is supported well that way. Once everything is fitted to your liking, you can run a thin bead of superglue around the perimeter of the case to finalize the build.
Statistics
Likes
4
Downloads
0