Cutting-Cork-base tool
Description
I realised wine corks work really well for base miniatures However, when I tried to cut them by hand they always ended up croocked The idea is to put the cork in a track allowing a straight cut with a cutter or something alike. I'm still making improvements, I'll read all coments if there's something I can improve. **UPDATE V2** Added version 2 It has a taller base, slightly wider space for the knife and this space goes through a little of the base. It is also smaller and it can cut 2 different heigths: 11mm or 8 mm I'm really confident about this update **UPDATE V3** Last version works fine, however it's a little bit narrow. So V3 is for corks with diameters of 22.5mm (0.885 in) If anyone is using a different size I can modify easily the STL And with this version I remove the work-in-progress label Remember all corks need sanding after being cut, I recommend sandpaper 120 and higher. I also recomend to put the cork 10 minutes in water before cutting it.
Statistics
Likes
2
Downloads
0